Home › Blog › Water Heater Not Heating
Troubleshooting guide

Water Heater Not Heating? What to Check Before You Call

A water heater not heating usually points to a handful of causes: power, thermostat, heating element, pilot light or sediment. This guide walks through each one for Owasso homeowners.

Plumber repairing copper supply lines at a Owasso, Oklahoma home(918) 897-0095Call to confirm availability
Start here

Common Reasons a Water Heater Stops Heating

When the shower runs lukewarm or cold, the cause depends on the type of heater. Electric tanks usually lose heat because of a tripped breaker, a failed thermostat or a burned-out element. Gas tanks usually lose heat because the pilot light is out, the thermocouple has failed or the burner is clogged.

SymptomLikely cause
No hot water at all (electric)Tripped breaker, reset switch or failed upper element
Warm but not hot (electric)Failed lower element or thermostat
No hot water (gas)Pilot light out or bad thermocouple
Hot water runs out fastSediment buildup or broken dip tube
Rumbling or popping noiseSediment hardened at the tank bottom
Safe checks

Checks You Can Do Safely

Start with the simple items. These steps do not require opening panels or touching wiring.

  • Check the breaker panel for a tripped breaker on the water heater circuit.
  • Look for the red reset button on an electric heater and press it once if it has tripped.
  • On a gas heater, confirm the pilot light is lit through the viewing window.
  • Check that the temperature dial is set to a normal setting, around 120 degrees.
  • Make sure the gas supply valve is open and other gas appliances work.
Safety note

Never light a pilot if you smell gas. Leave the home and call your gas utility. Turn off power before any electrical work.

Gas models

Pilot Light and Thermocouple Problems

A pilot that keeps going out is a common reason a gas water heater stops heating. A worn thermocouple cannot sense the flame, so it shuts off the gas. Drafts and dirty burner parts can cause the same problem. If relighting the pilot works only for a day or two, the part is wearing out. Our guide on why a pilot light keeps going out covers this in detail.

Electric models

Heating Elements and Thermostats

Electric tanks use two elements, each controlled by a thermostat. When one fails, the tank may still heat part of the water, so you get less hot water or water that runs cold quickly. Testing elements takes a meter and care around live power, so this is a good point to call a professional.

Tank health

Sediment Buildup and Aging Tanks

Minerals settle at the bottom of the tank over time. The layer insulates the water from the burner or lower element, so the heater works harder and heats less. Flushing the tank once a year slows this down. Older tanks that rust, leak or need repeated repairs are usually better replaced. See our water heater repair service for options in Owasso.

Next step

When to Call a Plumber

Call if the breaker trips again after resetting, the pilot will not stay lit, the tank leaks, or you hear loud rumbling. A technician can test the thermostat, element or gas parts and tell you whether repair or replacement makes more sense. For urgent cases such as a leak or gas smell, use our emergency plumbing service or call (918) 897-0095.

Water Heater Not Heating Questions

Why is my water heater not heating even though it has power?

A failed heating element, thermostat or thermocouple is the usual cause. These parts wear out and need testing.

Why does my hot water run out quickly?

Sediment buildup or a broken dip tube reduces usable hot water. Flushing the tank can help.

Can I fix a water heater that is not heating myself?

You can check breakers, the reset button and the pilot light. Part replacement should be left to a plumber.

How long does a water heater last?

Most tank models last roughly eight to twelve years, depending on water quality and maintenance.

Is a water heater that will not heat an emergency?

Not always, but a leak, gas smell or scalding water needs immediate attention.

Need Help With a Plumbing Problem in Owasso?

Call us and describe what is happening. We will explain the options and when we can visit.

Call (918) 897-0095
Call (918) 897-0095